Finishing process of woollen fabrics and finishing agents

With the improvement of consumption and finishing technology of wool fabric, woollen fabric varieties one after another. This is not a single textile technology can achieve, but textiles, chemicals, polymers and collection areas such as bioengineering technology, especially on the finishing technology is the most prominent. Thus, woollen fabric finishing technologies and a variety of finishing agents attach great importance to the application of wool textile industry.

Traditional finishing of wool fabric boils down to wet and dry two categories. Under the influence of the traditional concept, arranged some old equipment manufacturers install the ironer in the wet workshop, dryer installed in the workshop. Such installation arrangement is far from conducive to the development of modern finishing technology of wool fabric, finishing effect show extremely negative, and cause a lot of flaws.

A case study of softening, today's commonly used ammonia. base of modified silicone MicroEmulsion softener liquid if you wet the whole workshop, cropping and then sent to dry whole plant dry, due to pile up when cropping, fluid accumulation will cause varying texture of the fabric back and forth, sometimes soft crosspiece. At present, the finishing process of woollen fabric production that using mainly soft finish, oil pollution, shrink resistant, antistatic and sanitary finishing.

Applications can be selected according to the different fabric style class. Kind of softeners can also be mixed in different proportions. The former is characterized by smooth, its very fine emulsion particles, particle size at about μ m, molecules in the fibers, thus referred to as fiber softening agents.