Automatic Thread Trimmer Embroidery Machine Operation Points For Attention
Nov 14, 2015| 1, all pin high, you can't use hand-turn the dial.
2, pin high and cannot move, or easy to jam.
3, good preparations before driving rod, put on your bottom line, choose embroidery pattern, choose a good work matching the pattern (such as dribbling, sawtooth, winding, flat) and the right embroidery parameters.
4, Rod should be checked before driving down all pins (stitch zigzag stitch when they check if the robot is in the works). If not, you should manually put down all pins (put the manipulator to working), trolley drive, or likely to cause damage to the machine or leak flowers.
5, yet a little gold-embroidered, sequin device switches should be set aside on the host computer, or sequin device does not automatically lift.
Installation with 6, Golden air pressure to the right size, too small to be automatic movements, much easier installation with broken gold. After pressure fine don't transfer.
7, when making a three-in-one pattern 7MM embroidery sequin device boxes at least once, so as not to hit gold.
8, when new combinations of three-in-one pattern at a time, set the stitch points, should only be made a border inspection, when you switch around so as not to die, the box, and hit gold unit or head. Import pump Custer wine valve