Correct Maintenance Trimmer Ergonomics Extended Life

Every day before using the trimmer machine need risk check is blocked, tooth is there for oil, plastic barrel and head attached clean threads thoroughly before use. Note: remove barrel or when using reverse will cause the plastic barrel distortion.

Trimming machine before you need to check that the cutter is powered on, the correct method is: set cutter wire blade remove and then plug another power allocated interface when they heard the sound. Allocated wind machines and wires fixing the fan cover, plug into the other power interface, can start to dial out.

Check whether the power supply box is powered by a power box on travel plug (stationary not required) will also plug into the other power interface, press the power box power switch light lamp power, mounted blade cutters after you insert the power supply box cutters or fan socket power on normally.

Blades are sharp direct impact on the work, the correct method is: the blades mounted on the cutter head (head can be mounted on normal use of a knife), the suction opening, 8-10 threads inside the tooth, left, middle and right trimmer, lines to indicate that the blades sharp.