How To Choose A Computerized Flat Knitting Machine

The computerized flat knitting machine is a double-needle latch needle and weft knitting machine. Its cam device is like a set of flat cams. The stitches of the knitting needle can enter the groove of the cam and move the triangle to force the knitting needle to make regular movements in the needle groove of the needle plate, and pass the movement of the needle hook and the needle , The yarn can be knitted into knitted fabrics. When we buy a computerized flat knitting machine, we can choose a high-quality product through 5 points.

1. Look at the nose

The machine head is the heart of mechanical operation. The machine head components such as the needle selector, triangle, electromagnet and degree mesh drive the knitting needles to work. The core of the machine head is the triangular bottom plate. Proper selection of the triangular plate can increase the lifting speed and frequency of the starting cam, reduce the damage rate of the knitting needles, and also broaden the adjustable range of fabric density and improve the knitting quality of the fabric. . At present, domestic triangular production enterprises are subject to technical limitations such as materials, heat treatment, cryogenic treatment, and manufacturing, and it is difficult to compete with imported equipment. If the triangular base plate is not tough enough or the craftsmanship does not meet the standard, it will cause problems such as firing pins, fabric deformation, and serious mechanical problems. Wear, deformation, and blackening.

2. Look at the system

The computer system should be the brain of the entire machine. It is conceivable that this metaphor shows the importance of the computer. If the computer is unstable, it will definitely affect the output and quality of the product. All movements, patterns, speed, and density must be controlled by the computer, so it is also very important to choose a flat knitting machine with a stable computer system.

3. Look at the needle board

The needle plate should be regarded as the torso of the computerized flat knitting machine. It is also limited by materials, heat treatment, technology, manufacturing and other technologies. The poor selection of the needle plate will cause rough fabrics, plate wear, firing pins, and even blackening and ulceration of the needle plate. . If the fabric is not well-knitted, the stitches will go wrong.

4. Look at the knitting needles

The knitting needle is the finger of a computerized flat knitting machine. The warp and weft knitting of the yarn depends on it. In addition to the material toughness of the knitting needle, the design and precision of the needle hook and tongue of the needle are also very different.

5. Choose the model, just suitable

Whether it is suitable for your own production requirements, such as whether the goods are thick or fine needles, you must consider dual systems for thick needles, because there are many patterns that can be made, and the efficiency is high, the efficiency of a single system is basically incomparable. If it is a fine needle, it can be compared in many aspects. It is single-sided or twisted. The pattern does not need too much, and the single system is considered for running volume. If the funds are not too tight, it is recommended to use the dual system, the price is similar. From the perspective of long-term development and actual benefits, dual systems are still relatively advantageous.