How To Maintain The Computerized Flat Knitting Machine

To maintain the computerized flat knitting machine, we must also do daily maintenance. When we perform maintenance, we generally use some tools, including industrial vacuum cleaners, special cloth presses, hexagonal wrenches, brushes, woven cotton cloth, and needle-nose pliers And so on, these tools help to carry out maintenance work.

Maintenance of the computerized flat knitting machine can keep the machine in good working condition and extend its service life. It is mainly to clean and refuel it, and the cleaning can be from top to bottom, from inside to outside. Generally, during routine maintenance, the machine should be in a stopped state and power off state, screws should be tightened, disassembled parts should be reset, and lubricating oil and grease should be added.

Yarn clamping system: Use a vacuum cleaner to clean, and the manual interface after booting needs to be further cleaned.

Head: Use a vacuum cleaner to clean the probes and cotton wool, and wipe the front and back covers and flyovers of the head.

Yarn feeder and side tension device: It is required to be wiped clean and free of dust and oil.

Body oil injection system: Check whether the oil in the oil pump is always in supply. If the oil is insufficient, add it.

Knitting system: Use a vacuum cleaner to clean the color-changing frame and switching electromagnet. The color-changing block should be lubricated with special oil for the computer flat knitting machine, and no piece should be missed. First use cotton cloth to clean the guide rail of the machine head to remove grease and yarn scraps, and then inject the lubricating oil through the machine head brush, paying attention to the proper amount.